Re spoking wheels on a R75/5

How to; Why did it do that?; What do I do now!...

Re spoking wheels on a R75/5

Postby Dieter » Sun Feb 12, 2012 4:52 pm

Hi, as have purchased two sets of S/S spokes from (www.ulismotorradladen.de) I have also searched the net on the topic of wheel offset.
Everywhere it is stated that both front and rear wheels must have offset, the front wheel 10mm and the back wheel 6.5mm.
Having done the front wheel to this specification I have now found that the wheel is about 10mm out of center to the right (looking from the front).
As I assumed that the offset is necessary to center the wheels in the fork and rear frame, I am puzzled as what to do now?

Can anybody shed some light on this situation????????

P.S. cost of spokes including nipples is 48.80 Euros / set + fright


Dieter
Dieter
 
Posts: 4
Joined: Fri Jan 06, 2012 11:42 am

Re: Re spoking wheels on a R75/5

Postby wightman » Mon Feb 20, 2012 6:59 pm

Dieter, there are several members with R75/5 bikes, you could ask them. Brian an Art are 2 right off. Not being disc brake, it might be OK? There is a chap, Brian Morgan, (spoked wheel services) you could ask him..........

John :mrgreen:
wightman
 
Posts: 514
Joined: Wed Aug 13, 2008 8:37 pm


Return to Technical

Who is online

Users browsing this forum: No registered users and 4 guests