R1200 can you change TPM read out from BAR to PSI?

How to; Why did it do that?; What do I do now!...
Post Reply
User avatar
jono
Site Admin
Posts: 671
Joined: Sat 08 Mar, 2008 9:25 pm
Junk Test: No
Enter the middle number (7726): 7726
Location: Perth, WA

R1200 can you change TPM read out from BAR to PSI?

Post by jono »

R1200 can you change TPM read out from BAR to PSI?

Yes you can..

I have wanted to change the Tyre Pressure Monitor read out on my R1200GSA from BAR to PSI for some time. Now there is an easy way.
Using the clubs GS-911 Diagnostic tool you can change the display settings for a number of the on-board monitoring functions

Image

It's simple and quick. Not only does the GS-911 allow you to change these configurations it will also list any fault codes that may be associated with the Engine, ABS, Alarm, CanBus etc and allow you to see what the error is from before allowing you to clear it. You can update the service details and next service due indicators.

Just another handy benefit for club members
Top
wightman
Posts: 650
Joined: Wed 13 Aug, 2008 8:37 pm

Re: R1200 can you change TPM read out from BAR to PSI?

Post by wightman »

:?: Hi Hermann. We had one early December, so hopefully around February or so.........

Now can one have the readout in kPa?? John
Top
Post Reply

Return to “Technical”